1.1           Preconditions

·            The segments have two destinations.

·            The wires in the drawing are assigned to segments. This is required for the complete (automatic) functionality.

·            The preferred catalog must contain protection material. If the catalog does not contain protection material, then you can also enter it directly in the Protection Wizard.

·            The line styles required for representing the protection material are assigned to the sheet. You can find line styles for the most common protection materials in the graphic toolbox under Protection (see also Line style naming convention) or the EBCable demo project.

·            The calculation of the bend radii, outer diameters etc. can only be carried out if diameter values are defined for the relevant objects.

·            Wires: Outside diameter und bend radius

·            Protection material: Inside diameter