Parameter name

Description

(Representation in XML configuration file)

CableCoreSeparator=

Defines the separator between cable and core, e.g. CableCoreSeparator=: for the separator ":".

(<CableCoreSeparator>:</CableCoreSeparator>)

Data Option Mode =

Manages the representation

11: current standard settings

15: Displays all representations of terminals (in circuit diagrams).

(<GetDataOPMode>11<GetDataOPMode>)

Destination Pin Info=

In the terminal diagram, the value specified in the attribute Destination Pin Info is displayed.

Q: If terminals have a cross-connection to other destinations.

Is used in combination with the attributes ExtDestInfo and IntDestInfo.

(<DestPinInfo>Q</DestPinInfo>)

Function separator=

A separator separating the individual levels of the destination designations of the functions, the default is Blank. See chapter 7.7 Suppressing Blank Spaces when Displaying External and Internal Destinations.

(<FunctionSeparator></FunctionSeparator>: suppression of blanks

<FunctionSeparator><![CDATA[ ]]></FunctionSeparator>: blanks as separators)

HideTerminalBlockLocation=0

0: Shows the terminal block name and all named units in the destination designations.

1: With equal unit in the target designation and in the terminal block, the name of the unit will not be displayed.

2: Stands for cutting rules according to DIN.

(<HideTerminalBlockLocation>2</HideTerminalBlockLocation>)

Location separator=

A separator separating the individual levels of the destination designations of the units, the default is Blank. See chapter 7.7 Suppressing Blank Spaces when Displaying External and Internal Destinations.

(<LocationSeparator></LocationSeparator>: Suppression of blanks

<LocationSeparator><![CDATA[ ]]></LocationSeparator>: blanks as separators)

New Column For Sub-Cables=

Blank: Only for the most frequent cables a separate column will be created.

1: Separate columns are created for cables that themselves are parts of a cable.

2: Cables of type = Pair will be displayed in one column.

(<NewColumnForSubCables>1<NewColumnForSubCables>)

Pin Separator=

Defines the separator between device and pin, e.g. Pin Separator=: for the separator ":".

(<PinSeparator>:</PinSeparator>)

Shape Options=

0: In the terminal row, the attribute values will be displayed in the foreground (Default).

(<ShapeOptions>0</ShapeOptions>)

1: In the terminal row, the Master Shapes will be displayed in the foreground.

(<ShapeOptions>1</ShapeOptions>)

Terminal Representation Options=

0: Internal and external representations will be displayed.

1: Only the representation within the drawing is shown.

2: The cross-reference of a terminal that is placed on the circuit diagram but not connected is displayed.

(<TerminalRepresentationOptions>1</TerminalRepresentationOptions>)

Terminal Separator=

Defines a separator to make the target pin designation easier to read.

The separator is inserted between:

·            Terminal Segment Designation

·            Terminal Number

·            Pin designation.

<TerminalSeparator>;</TerminalSeparator>

Terminal Summary Options=

0: The terminal most used is entered as standard terminal type.

1: The predefined standard terminal (attribute Standard Terminal Type at the terminal block) is used as the standard terminal type. If this attribute is not set, the terminal most used terminal is displayed as the standard terminal type.

(<TerminalSummaryOptions>1</TerminalSummaryOptions>)