Parameter name

Description

(Representation in XML configuration file)

Bridge for Potential=0

1: bridges are created if terminals have the same potential even if they are not connected by a wire.

2: bridges are created if terminals have the same name even if they are not connected by a wire. (<ConnectPotentialByBridge>1</ConnectPotentialByBridge>)

Bridge Options=0

0: Representation of the bridges with endpoints

(<BridgeOptions>0</BridgeOptions>)

1: no bridges are created for Automatic Wires.

2: Representation of the fixed bridges without endpoints.

See chapter 7.8 Jumper Representation without Endpoints.

(<BridgeOptions>2</BridgeOptions>)

MaxBridges=

Maximum number of bridges that can be shown in the terminal block diagram.

(MaxBridges>2</MaxBridges>)

MaxWireBridges=

Maximum number of internal wire bridges that can be shown in the terminal block diagram.

(<MaxWireBridges>2</MaxWireBridges>)

MaxWireBridgesExt=

Maximum number of external wire bridges.

(<MaxWireBridgesExt>2</MaxWireBridgesExt>)