Message

Meaning

Error

Cable duct dimension invalid. Cannot calculate the filling rate!

Error

Errors were detected while calculating data. Check all errors and start the routing again.

Error

Failed to read the attribute with id =

Error

Invalid cable duct information. Is the cable duct ‘…’ already represented?

Error

Missing a connection point to connect the cable ducts!

Error

No cable ducts for export found.

Error

No devices for export found.

Error

The mounting angle for the device is not permitted. Use only 0° and 90°!

Error

The object ‘…’ has multiple representations on different layout sheets!

Error

The object '…' is not aggregated to a mounting rail!

Information

Routing of wire failed from ‚object ‘1’ to ‘object 2’.

Information

The wire ‘…’ was routed over the mounting place boundary!

Information

Wire was ruled out from routing! Wire not routed from ‘object 1’ to ‘object 2’.

Warnings

Empty pin ‘x’ position found. Default pin position was used!

Warnings

Empty pin ‘y’ position found. Default pin position was used!

Warnings

Empty pin ‘z’ position found. Default pin position was used!

Warnings

Empty pin wire direction found. Default wire direction was used!

Warnings

He cable duct exceeds the valid filling rate!

Warnings

Invalid EMC Class.

Warnings

Item was excluded from routing!

Warnings

Missing object height to calculate routing.

Warnings

Missing object width to calculate routing.

Warnings

The attribute 'FastWireType' is obsolete. Please remove it from ‘…’.

Warnings

The default cable length to connect cable ducts was used!

Warnings

The layout diagram contains a not 'none electrical symbol'!

Warnings

Unknown pin wire direction found. Default wire direction was used

Warnings

Wire color not specified. The default wire color was used.

Warnings

Wire size / gauge not specified. The default wire size / gauge was used.

·            If errors are reported they have to be corrected!

·            If errors occurred, the length and paths are not calculated!

·            If warnings or information messages are reported, the lengths are calculated!